Gentoo booted by efi 安裝筆記(2016)

liveCD 進入桌面，無線聯網,下載stage3

#parted /dev/sda

　　partition table:gpt

　　number　　start　　end　　file system　　name　　flags

　　1　　　　　　　　　　　　　　　　　　　efi system partition

#mount /dev/sda9 /mnt/gentoo

#ls

　　stage#*.tar.xz

#xz stage3.*.tar.xz

#tar xvf stag*.tar

root #mirrorselect -i -o >> /mnt/gentoo/etc/portage/make.conf

　　https://mirrors.163.com/gentoo/

　　https://mirrors.tuna.tsinghua.edu.cn/gentoo/

root #mkdir --parents /mnt/gentoo/etc/portage/repos.conf

root #cp /mnt/gentoo/usr/share/portage/config/repos.conf /mnt/gentoo/etc/portage/repos.conf/gentoo.conf

root #cp --dereference /etc/resolv.conf /mnt/gentoo/etc/

root #mount --types proc /proc /mnt/gentoo/proc

root #mount --rbind /sys /mnt/gentoo/sys

root #mount --make-rslave /mnt/gentoo/sys

root #mount --rbind /dev /mnt/gentoo/dev

root #mount --make-rslave /mnt/gentoo/dev

root #chroot /mnt/gentoo /bin/bash

root #source /etc/profile

root #export PS1="(chroot) ${PS1}"

root #mkdir /boot

root #mount /dev/sda1 /boot

root #passwd

root #emerge-webrsync

root #emerge --sync --quiet

root #eselect news list

root #eselect news read all

root #eselect profile list

root #eselect profile set default/linux/amd64/13.0/systemd

root #eselect profile list

　　Available profile symlink targets:
 　　 [10]  default/linux/amd64/13.0/developer
  　　[11]  default/linux/amd64/13.0/no-multilib
  　　[12]  default/linux/amd64/13.0/systemd *
  　　[13]  default/linux/amd64/13.0/x32
  　　[14]  hardened/linux/amd64

　　 there is no desktop selected for a small and clean system,so check eaiser out question point

root #emerge --ask --verbose --update --deep --newuse @world

root #emerge gentoo-sources

root# cd /sur/src/linux

#make menuconfig

#make && make install && make modules-install

#emerge --ask sys-kernel/linux-firmware

root #nano -w /etc/fstab

root #emerge --ask sys-kernel/genkernel-next

　　* Call stack:
　　* ebuild.sh, line 133: Called src_compile
　　* environment, line 4217: Called multilib-minimal_src_compile
　　* environment, line 2339: Called multilib_foreach_abi 'multilib-minimal_abi_src_compile'
　　* environment, line 2570: Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_compile'
　　* environment, line 2217: Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_compile'
　　* environment, line 2215: Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_compile'
　　* environment, line 400: Called multilib-minimal_abi_src_compile
　　* environment, line 2333: Called multilib_src_compile
　　* environment, line 2826: Called building
　　* environment, line 2794: Called die
　　* The specific snippet of code:
　　* ejam ${OPTIONS} ${PYTHON_OPTIONS} || die "Building of Boost libraries failed";

　　Got resolution.
　　Based on your comment about possible OOM error... tried -jX until -j1 and was able to build without error. I'll bill this off as memory usage due to livecd.
　　So for anyone else who stumbles into this one based on any keywords present in this thread...
　　Ignore suggestion of using -j(number of cores + 1) and instead set -j1 and see if it builds,

　　OK.

# vi

/etc/genkernel.conf

# Use udev instead of mdev as the default device manager for the initramfs.
# If systemd and perhaps lvm is used, then this _must_ be turned on.
UDEV="yes"

--# genkernel --lvm --install initramfs

--next setup bootloader ,using efibootmgr without initramfs (test,ok ? failse?)

#emerge efibootmgr

#cp /boot/vm* /boot/EFI/gentoo/vmlinuz.efi

#efibootmgr --create --disk /dev/sda --part 1 --lable "gentoo" --loader "\efi\gentoo\vmlinuz.efi"

　　it's ok

　　using efibootmgr with initramfs in parameters (test,ok ? failse?)

　　using efibootmgr with initramfs in kernel cmd-line (test,ok ? failse?)


root #

emerge -avDN @world

root #emerge --deselect sys-fs/udev

root #systemctl daemon-reexec

　　running in chroot ,ignore request:daemon-reexec

-

　　install nvidia

　　install xorg-server

　　install gnome (webkitgtk is most cost)

--about touchpad--

# cat /proc/bus/input/devices

　　I: Bus=0011 Vendor=0002 Product=0008 Version=0700
　　N: Name="AlpsPS/2 ALPS GlidePoint"
　　P: Phys=isa0060/serio1/input0
　　S: Sysfs=/devices/platform/i8042/serio1/input/input7
　　U: Uniq=
　　H: Handlers=event8
　　B: PROP=5
　　B: EV=b
　　B: KEY=e520 10000 0 0 0 0
　　B: ABS=260800000000003

　　This touchpad is identified as PS/2 Mouse,which only Left click and Right Click ^_^

posted @ 2020-03-06 14:26 Bo_Ren 閱讀(311) 評論(0) 收藏舉報

刷新頁面返回頂部

路漫漫，其修遠，上下而求索

Gentoo booted by efi 安裝筆記(2016)

公告