如果DFS中包含WindowsXp或Windows7的共享文件夾時，本機是無法訪問屬于本機共享的文件夾的，微軟處于安全及用途考慮禁止如此訪問，可以通過修改注冊表調整。在注冊表：HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Mup\Parameters添加DWORD類型的EnableDfsLoopbackTargets項，賦值為1即可。

原文如下：

  Although computers running Windows Vista? or Windows? 7 can host folder targets, they are generally unsuitable for use as file servers. In addition to their limit of 10 concurrent incoming SMB connections, computers running Windows Vista or Windows 7 by default cannot navigate a DFS namespace to a folder target hosted on the local computer. For example, if a user on a computer running Windows Vista (\client1) attempts to connect to a DFS folder whose folder target is a shared folder located on the same computer (\client1), the connection attempt will fail. This is considered a loopback connection. This behavior is designed to help prevent a rogue namespace server from redirecting a client computer to an administrative share on the client computer (for example \127.0.0.1\C$), and then reading or writing files in the shared folder.
  To allow a client computer access to folder targets located on the local computer (the default behavior on servers), open Registry Editor, navigate to the following location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Mup\Parameters, create a DWORD (32-bit) value named EnableDfsLoopbackTargets, and then set the value to 1. After changing the value, restart the computer.
  To disable DFS loopback targets (the default behavior on client computers), set the value to 0. After changing the value, restart the computer.