第八周

1、DR模式下vip不在同一網段上實現過程（跨網段）

準備環境：

1.準備客戶端環境：

[root@cip ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
NAME=eth0
BOOTPROTO=static
IPADDR=172.16.17.77
PREFIX=24
GATEWAY=172.16.17.17
ONBOOT=yes

2.準備router路由器環境：

#首先配置eth0是橋接模式 ip為172.16.17.17，eth1是NAT模式 ip為192.168.16.7
[root@router ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:b5:9d:3d brd ff:ff:ff:ff:ff:ff
    inet 172.16.17.17/24 brd 172.16.17.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:feb5:9d3d/64 scope link tentative 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:b5:9d:47 brd ff:ff:ff:ff:ff:ff
    inet 192.168.16.7/24 brd 192.168.16.255 scope global noprefixroute eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:feb5:9d47/64 scope link 
       valid_lft forever preferred_lft forever
#在eth0上增加個vip 10.0.0.200
[root@router ~]# nmcli connection modify eth1 +ipv4.addresses 10.0.0.200/24 ifname eth1
[root@router ~]# nmcli c reload
[root@router ~]# nmcli c up eth1
#網卡配置
[root@router ~]#  cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
NAME=eth0
BOOTPROTO=static
IPADDR=172.16.17.17
PREFIX=24
ONBOOT=yes
?
[root@router ~]#  cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
NAME=eth1
IPADDR=192.168.16.7
PREFIX=24
ONBOOT=yes
?
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
IPADDR1=10.0.0.200
PREFIX1=24
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
UUID=9c92fad9-6ecb-3e6c-eb4d-8a47c6f50c04
?
[root@router ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:b5:9d:3d brd ff:ff:ff:ff:ff:ff
    inet 172.16.17.17/24 brd 172.16.17.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:feb5:9d3d/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:b5:9d:47 brd ff:ff:ff:ff:ff:ff
    inet 192.168.16.7/24 brd 192.168.16.255 scope global noprefixroute eth1
       valid_lft forever preferred_lft forever
    inet 10.0.0.200/24 brd 10.0.0.255 scope global noprefixroute eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:feb5:9d47/64 scope link 
       valid_lft forever preferred_lft forever     
[root@router ~]# vim /etc/sysctl.conf 
[root@router ~]# sysctl -p
net.ipv4.ip_forward = 1

3.使用腳本配置LVS環境

[root@lvs ~]# yum -y install ipvsadm
?
[root@lvs network-scripts]# cat lvs.sh 
#!/bin/bash
#
#********************************************************************
#Author:        yangxiaohao
#QQ:            1443964024
#Date:          2020-11-08
#FileName：      lvs.sh
#URL:           
#Description：       The test script
#Copyright (C):     2020 All rights reserved
#********************************************************************
vip='10.0.0.100'
iface='lo:1'
mask='255.255.255.255'
port='80'
rs1='192.168.16.17'
rs2='192.168.16.27'
scheduler='wrr'
type='-g'
rpm -q ipvsadm &> /dev/null || yum -y install ipvsadm &> /dev/null
case $1 in
start)
 ifconfig $iface $vip netmask $mask #broadcast $vip up
 iptables -F
 ipvsadm -A -t ${vip}:${port} -s $scheduler
 ipvsadm -a -t ${vip}:${port} -r ${rs1} $type -w 1
 ipvsadm -a -t ${vip}:${port} -r ${rs2} $type -w 1
 echo "The VS Server is Ready!"
 ;;
stop)
 ipvsadm -C
 ifconfig $iface down
 echo "The VS Server is Canceled!"
 ;;
*)
 echo "Usage: $(basename $0) start|stop"
 exit 1
 ;;
esac
[root@lvs network-scripts]# bash lvs.sh start
The VS Server is Ready!
[root@lvs network-scripts]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet 10.0.0.100/32 scope global lo:1
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:dc:d4:9d brd ff:ff:ff:ff:ff:ff
    inet 192.168.16.8/24 brd 192.168.16.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fedc:d49d/64 scope link 
       valid_lft forever preferred_lft forever
       
[root@lvs network-scripts]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.100:80 wrr
  -> 192.168.16.17:80             Route   1      0          0         
  -> 192.168.16.27:80             Route   1      0          0

4.準備后端服務器RS1,RS2

#準備RS1
[root@rs1 ~]# yum -y install httpd;systemctl enable --now httpd 
[root@rs1 ~]# echo `hostname` > /var/www/html/index.html
[root@rs1 ~]# vim lvs.sh 
#!/bin/bash
vip=10.0.0.100
mask='255.255.255.255'
dev=lo:1
#rpm -q httpd &> /dev/null || yum -y install httpd &>/dev/null
#service httpd start &> /dev/null && echo "The httpd Server is Ready!"
#echo "`hostname -I`" > /var/www/html/index.html
case $1 in
start)
  echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
  echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
  echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
  echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
  ifconfig $dev $vip netmask $mask #broadcast $vip up
  echo "The RS Server is Ready!"
  ;;
stop)
  ifconfig $dev down
  echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
  echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
  echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
  echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
  echo "The RS Server is Canceled!"
  ;;
*)
  echo "Usage: $(basename $0) start|stop"
  exit 1
  ;;
esac
?
[root@rs1 ~]# bash lvs.sh start
The RS Server is Ready!
[root@rs1 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet 10.0.0.100/32 scope global lo:1
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:ec:26:69 brd ff:ff:ff:ff:ff:ff
    inet 192.168.16.17/24 brd 192.168.16.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:feec:2669/64 scope link 
       valid_lft forever preferred_lft forever
?
#準備RS2
[root@rs2 ~]# yum -y install httpd;systemctl enable --now httpd;
[root@rs2 ~]#echo `hostname` > /var/www/html/index.html
[root@rs2 ~]# vim lvs.sh 
#!/bin/bash
vip=10.0.0.100
mask='255.255.255.255'
dev=lo:1
#rpm -q httpd &> /dev/null || yum -y install httpd &>/dev/null
#service httpd start &> /dev/null && echo "The httpd Server is Ready!"
#echo "`hostname -I`" > /var/www/html/index.html
case $1 in
start)
  echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
  echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
  echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
  echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
  ifconfig $dev $vip netmask $mask #broadcast $vip up
  echo "The RS Server is Ready!"
  ;;
stop)
  ifconfig $dev down
  echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
  echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
  echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
  echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
  echo "The RS Server is Canceled!"
  ;;
*)
  echo "Usage: $(basename $0) start|stop"
  exit 1
  ;;
esac
[root@rs2 ~]# bash lvs.sh start
The RS Server is Ready!
[root@rs2 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet 10.0.0.100/32 scope global lo:1
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:95:6f:d4 brd ff:ff:ff:ff:ff:ff
    inet 192.168.16.27/24 brd 192.168.16.255 scope global noprefixroute eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe95:6fd4/64 scope link 
       valid_lft forever preferred_lft forever
?

5.客戶端測試

[root@cip ~]#curl 10.0.0.100
rs1
[root@cip ~]#curl 10.0.0.100
rs2
[root@cip ~]#curl 10.0.0.100
rs1
[root@cip ~]#curl 10.0.0.100
rs2

2、CentOS7.6 中 nfs 客戶端使用 /etc/fatab 實現開機自動掛載

環境：
10.0.0.7    服務器端
10.0.0.17    客戶端
#服務器端配置
#安裝包
[root@centos7 ~]#yum -y install nfs-utils 
#開機自啟
[root@centos7 ~]#systemctl enable --now nfs-server
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.
[root@centos7 ~]#
#創建共享目錄
[root@centos7 ~]# mkdir -pv /data/www
mkdir: created directory '/data/www'
[root@centos7 ~]# setfacl -m u:nobody:rwx /data/www
#實現共享
[root@centos7 ~]# vim /etc/exports 
/data/www   *(rw,all_squash,async)
#重新加載
[root@centos7 ~]#exportfs -r
[root@centos7 ~]# exportfs -v
/data/www       <world>(sync,wdelay,hide,no_subtree_check,sec=sys,rw,root_squash,no_all_squash)
?
#客戶端配置
[root@centos17 ~]#yum -y install nfs-utils
[root@centos17 ~]#systemctl enable --now nfs-server
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.
[root@centos17 ~]#showmount -e 10.0.0.7
Export list for 10.0.0.7:
/data/www *
?
#實現開機自動掛載
[root@backup ~]# cat /etc/fstab
10.0.0.7:/data/www     /data/backup                     nfs     _netdev,noexec        0 0

3、CentOS7.6 中 nfs 客戶端使用 autofs 實現使用 nfs 時實時掛載

環境：
10.0.0.7    服務器端
10.0.0.17    客戶端
#服務器端配置
#安裝包
[root@centos7 ~]#yum -y install nfs-utils 
#開機自啟
[root@centos7 ~]#systemctl enable --now nfs-server
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.
[root@centos7 ~]#
#創建共享目錄
[root@centos7 ~]# mkdir -pv /data/www
mkdir: created directory ‘/data/www’
[root@centos7 ~]# setfacl -m u:nobody:rwx /data/www
#實現共享
[root@centos7 ~]# vim /etc/exports 
/data/www   *(rw,all_squash,async)
#重新加載
[root@centos7 ~]#exportfs -r
[root@centos7 ~]# exportfs -v
/data/www       <world>(sync,wdelay,hide,no_subtree_check,sec=sys,rw,root_squash,no_all_squash)
?
#客戶端配置
[root@centos17 ~]#yum -y install nfs-utils
[root@centos17 ~]#systemctl enable --now nfs-server
Created symlink from /etc/systemd/system/multi-user.target.wants/nfs-server.service to /usr/lib/systemd/system/nfs-server.service.
[root@centos17 ~]#showmount -e 10.0.0.7
Export list for 10.0.0.7:
/data/www *
?
#相對路徑
[root@centos17 ~]#yum -y install autofs
[root@centos17 ~]#vim /etc/auto.master
/data   /etc/data.nfs
[root@centos17 ~]#vim /etc/data.nfs
backup  10.0.0.7:/data/www
[root@centos17 ~]#systemctl restart autofs
[root@centos17 ~]#df /data/backup
Filesystem         1K-blocks  Used Available Use% Mounted on
10.0.0.7:/data/www  52403200 32896  52370304   1% /data/backup
?
#絕對路徑
[root@centos17 ~]# vim /etc/auto.master
/-   /etc/data.backup
[root@centos17 ~]# cat /etc/data.backup
/data/backup -ftype=nfs,vers=3 10.0.0.7:/data/www
?
[root@centos17 ~]# df /data/backup
Filesystem         1K-blocks  Used Available Use% Mounted on
10.0.0.7:/data/www  52403200 32896  52370304   1% /data/backup
[root@centos17 ~]# df
Filesystem                      1K-blocks    Used Available Use% Mounted on
devtmpfs                           485816       0    485816   0% /dev
tmpfs                              497856       0    497856   0% /dev/shm
tmpfs                              497856    7824    490032   2% /run
tmpfs                              497856       0    497856   0% /sys/fs/cgroup
/dev/mapper/centos_centos7-root 104806400 1479884 103326516   2% /
/dev/sda1                         1038336  153532    884804  15% /boot
/dev/mapper/centos_centos7-data  52403200   32992  52370208   1% /data
tmpfs                               99572       0     99572   0% /run/user/0
10.0.0.7:/data/www               52403200   32896  52370304   1% /data/backup

posted @ 2020-11-08 23:28 肖豪閱讀(151) 評論(0) 收藏舉報

刷新頁面返回頂部

肖豪

第八周

1、DR模式下vip不在同一網段上實現過程（跨網段）

2、CentOS7.6 中 nfs 客戶端使用 /etc/fatab 實現開機自動掛載

3、CentOS7.6 中 nfs 客戶端使用 autofs 實現使用 nfs 時實時掛載

公告